HDMI 2.0 4×1 Presentation Switcher with Audio Extraction, Display Control
SCU41E
-
Description
-
Additional information
HDMI 2.0 4x1 Presentation Switcher with Audio Extraction, Display Control
HDMI 2.0 4x1 Presentation Switcher with Audio Extraction, 1x HDMI/MHL, 2x HDMI, 1x DP Input and 1x HDMI output, Display can control via Switcher
The switcher allows selection of four different sources (three HDMI inputs and one DisplayPort input), and will simultaneously switch the selected video to HDMI output. It supports video resolution up to 4Kx2K@60Hz 4:4:4 8bit, 1080P, and 3D. In addition, there is the smart built-in EDID setting can be selected by the 4-pin DIP switch on the rear panel.
The switcher supports stereo and multichannel audio on the HDMI inputs. In addition to the audio embedded in the HDMI output stream, the audio is simultaneously de-embedded to an optical digital audio output and a balanced analog audio output.
The switcher features multiple methods of control. When in the AUTO mode, the switcher will automatically switch to the first detected source device. When the active source is removed, the switcher will switch from input 1 to 4. The switcher can be manually controlled by the front panel buttons, IR remote and RS232 command. CEC allows the display device can be controlled by the front panel buttons and RS232 CEC commands.
- Supports HDMI 2.0 and video resolution up to 4K@60Hz 4:4:4 8bit, 1080P, and 3D.
- 18Gbps bandwidth and supports HDR10， HDR10+, Dolby Vision.
- HDCP 2.2
- Supports automatic switching.
- CEC control for display volume and ON/FF.
- Controllable via RS232 and IR.
- Optical and balanced analog audio for audio de-embedding.
- Smart EDID management for various application and customized setting.
| Video | |
| Video Input | (1) HDMI/MHL, (2) HDMI, (1) DP |
| Video Input Connector | (3) Type-A female HDMI, (1) DisplayPort |
| HDMI Input Resolution | Up to 4Kx2K@60Hz 4:4:4 8bit |
| MHL Input Resolution | Up to 1080P@60Hz |
| DP Input Resolution | Up to 4Kx2K@60Hz 4:4:4 8bit |
| Video Output | (1) HDMI |
| Video Output Connector | (1) Type-A female HDMI |
| HDMI Output Resolution | Up to 4Kx2K@60Hz 4:4:4 8bit |
| HDMI Version | 2.0 |
| HDCP Version | 2.2 |
| MHL Version | 2.2 |
| DP Version | 1.2 |
| HDR 10 | Supported |
| CEC | Supported |
| HPD | Supported |
| Audio | |
| Audio Output | (1) OPTICAL, (1) Stereo balanced L/R |
| Audio Output Connector | (1) Toslink connector, (1) 5-pin terminal block |
| HDMI Audio Format | LPCM 7.1 audio, Dolby Atmos®, Dolby® TrueHD, Dolby Digital® Plus, DTS: X™, and DTS-HD® Master Audio™ pass-through. |
| Stereo analog L/R audio Format | PCM |
| Toslink Digital Audio Format | PCM, Dolby Digital, DTS, DTS-HD |
| Max Output Level | 2.0Vrms ± 0.5dB. 2V = 16dB headroom above -10dBV (316mV) nominal consumer line level signal |
| THD+N | <0.05% (-80dB), 20Hz ~ 20KHz bandwidth, 1KHz sine at 0dBFS level (or max level) |
| SNR | >80dB, 20Hz ~ 20KHz bandwidth |
| Crosstalk Isolation | >70dB, 10KHz sine at 0dBFS level (or max level before clipping) |
| L-R Level Deviation | < 0.3dB, 1KHz sine at 0dBFS level (or max level before clipping) |
| Frequency Response Deviation | <± 0.5dB 20Hz ~ 20KHz |
| Output Load Capability | 1KΩ and higher (supports 10x paralleled 10KΩ loads) |
| Stereo Channel Separation | >70dB@1KHz |
| Control Part | |
| Control | (1) FW, (1) EDID, (1) IR IN, (1) RS232, (1) TCP/IP |
| Control Connector | (1) Micro-USB, (1) 4-pin DIP switch, |
| (1) 3.5mm mini jack, (1) 3-pin terminal block, (1) RJ45 | |
| General | |
| HDMI 2.0 Cable Length | 4K@60Hz 4:4:4 ≤ 5m, |
| 4K@60Hz 4:2:0 ≤ 10m, | |
| 1080P ≤ 15m | |
| Bandwidth | 18Gbps |
| Operation Temperature | -10℃ ~ +55℃ |
| Storage Temperature | -25℃ ~ +70℃ |
| Relative Humility | 10%-90% |
| External Power Supply | Input: AC 100~240V, 50/60Hz, Output: 12V DC 1A |
| Power Consumption | 5W (Max) |
| Dimension (W*H*D) | 262mm x 26mm x 84mm |
| Net Weight | 320g |
- 1x SCU41E HDMI 2.0 4×1 Presentation Switcher
- 2x Mounting Ears with 4 Screws
- 4x Plastic Cushions
- 1x IR Receiver
- 1x IR Remote
- 1x 3-pin Terminal Block
- 1x 5-pin Terminal Block
- 1x RS232 Cable (3-pin terminal block to DB9)
- 1x Power Adapter (12V DC, 1A)
- 1x User Manual
| Video Resolution | 1080P, 4K |
|---|
You may also like
-
Switchers & ConvertersHDMI 2.0 6x1 Presentation Switcher with Audio Extraction, Display Control
