18G HDMI V2.0 Cost-effective Extender Set over CAT5e/CAT6
NPG-EX60-H2
Share this product:
-
Description
-
Additional information
18G HDMI V2.0 Cost-effective Extender Set over CAT5e/CAT6, Down-scaling via Receiver
18G HDMI V2.0 Cost-effective Extender Set over CAT5e/CAT6, PoC supports, with IR Extend
The NPG-EX60-H2 is a cost-effective point-to-point extender set for HDMI V2.0 and IR signals; this kit supports 4K/UHD video @ 60 Hz with 4:4:4 Chroma sampling, as well as HDMI data rates up to 18Gbps, HDCP 2.2 compliant; It provides HDMI transmission up to 230 feet (70 meters) for 4K@60Hz 4:4: 4 or 1080p, over single CAT5e/6 cable. It supports video resolution down-scaling, the 4K input can be automatically downscale to 1080p output for compatibility with 1080p display.
- Supports HDMI V2.0, up to 4K@60Hz 4:4:4, HDR 10, 18G, HDCP 2.2.
- Extends 4K or 1080p HDMI signal up to 230 feet (70m) over a single CAT5e/6 cable.
- HDMI loop out on transmitter.
- Bi-directional IR pass-through.
- Supports video resolution down-scaling, the 4K input can be automatically degraded to 1080p output on receiver for compatibility with legacy 1080p display device.
- Features visually lossless compression with no latency.
- Smart EDID management.
- Compact design, easy to install and simple to operate.
| Transmitter | |
| Input | (1) SOURCE |
| Input Connector | (1) 19-pin type-A female HDMI |
| Output | (1) DISPLAY, (1) CATx OUT |
| Output Connector | (1) 19-pin type-A female HDMI, (1) RJ45 |
| Control | (1) IR IN, (1) IR OUT |
| Control Connector | (2) 3.5mm mini jacks |
| Receiver | |
| Input | (1) CATx IN |
| Input Connector | (1) RJ45 |
| Output | (1) DISPLAY |
| Output Connector | (1) 19-pin type-A female HDMI |
| Control | (1) IR IN, (1) IR OUT |
| Control Connector | (2) 3.5mm mini jacks |
| General | |
| Video Resolution | Up to 4K@60Hz 4:4:4, HDR 10 |
| HDMI Audio Format | Supports LPCM 2ch, LPCM 5.1ch, LPCM 7.1ch, Dolby Digital 2ch, Dolby Digital 5.1ch, DTS 2ch, DTS 5.1ch, DTS 96/24 5.1ch. |
| Transmission Distance | 4K/1080p ≤ 70 meters (230ft) |
| Note that the CATx cable length should not be less than 15 meters for best video output.. | |
| HDMI Version | HDMI V2.0 |
| HDCP Version | HDCP 2.2 compliant. (The HDCP of output follows the HDCP version of display device.) |
| EDID | EDID management |
| Power Supply | Input: 100VAC~240VAC, 50/60Hz; |
| Output: 12VDC 1A | |
| Power Consumption | 4W (Max) |
| Operation Temperature | -5~55℃ |
| Storage Temperature | -25~70℃ |
| Relative Humidity | 10%-90% |
| Dimensions (W*H*D) | 80mm x 16.8mm x 80mm |
| Net Weight | Tx/Rx: 70g |
- 1x Transmitter (Tx)
- 1x Receiver (Rx)
- 1x IR Receiver
- 1x IR Emitter
- 2x Velcro Strips
- 1x Power Adaptor (12V DC 1A)
- 1x User Manual
| Video Resolution | 1080P, 4K |
|---|---|
| Cable Type | Copper |
