Back to top
  • +905437600862 (9AM 6PM)
  • Professional Video and Audio Solutions
Out of stock

4×1 Multi-Format Scaler Switcher with HDBaseT Output – Discounted


SKU: SCUH1819 Category:
Share this product:

4×1 Multi-Format Scaler Switcher with HDBaseT Output

HDMI 1.4 4×1 Multi-Format Scaler Switcher, 1x DP, 1x HDMI, 1x DVI, 1x VGA Video Signal Input and 1x HDBaseT Video Signal Output inc. HDBaseT Receiver

The Multi-Format Video Scaler with Extension is a compact mini scaler switcher with 4 video inputs (1 HDMI, 1 DP, 1 DVI, and 1 VGA). As the VGA input supports VGA, YPbPr and C-video, so the scaler switcher works with multiple video signals.

This product scales and switches any video signal to HDBaseT output (supports PoH and connects to a Video Extender-HDBaseT Receiver, up to a maximum transmission distance of 100 meters 4K ultra HD. With (1) IR IN and (1) RS232, the IR and RS232 signals can be transmitted between the Scaler Switcher and HDBaseT Receiver.

  • Compact 4×1 multi-format switcher with 4 video inputs 1 HDMI, 1 DP, 1 DVI, 1 VGA), 1 auxiliary audio input mirrored to the VGA/DVI input and 1 Dual-Mono analog audio output .
  • Compliant with HDCP2.2.
  • Switches HDMI/DP/DVI/VGA input signals to HDBaseT output.
  • Scales to 6 different resolutions, DVI/VGA to HDBaseT output-Output resolution selectable to assure preferred output. Support various output resolution, such as 1024×768, 1280×720, 1280×800, 1360×768, 1600×1200,1920×1080 (default, can be chosen via commands or IR remote), 1920×1200.
  • Support HDBT2.0, transmit 4Kx2K signal up to 100m via single CAT5e/CAT6 cable.
  • Controlled via Front-panel button, IR and bi-directional RS232.
  • Controlled via Dry Contact.
  • Support advanced EDID Management.
  • Two input switching modes: auto-switching or manual-switching.
  • Intuitive indicator for power connect states, source selection, and switching mode selection.
  • DVI video supports digital signal, VGA, YPbPr, C-video.
  • VGA video supports C-video, YPbPr and VGA.
  • Features a USB port for Firmware upgrades.
  • Compact design for easy operation, works in a variety of applications from security monitoring, conference rooms, classrooms, control center and smart homes.
  • Features off memory for reliable operation – input and output mapping is automatically stored and recalled when the unit is powered on and off and in the event of a power outage.

Supports hot plug.

I/O Connections
HDM Input One(1) Type A receptacle
DP Input One(1) Type A DisplayPort
DVI Input One(1) Type DVI-I female receptacle
VGA Input One(1) HD-15 female receptacle
External Audio Input One(1) 3.5mm TRS jack
HDBaseT Output One(1) RJ45 receptacle
Audio Output One(1) 3-pin phoenix connector
IR Input One(1) 3.5mm TRS jack
RS232 Control One(1) DB9 female receptacle
External button Control (SIG 5V) One(1) 3-pin phoenix connector
Button Control(Front Panel) One(1) button in total
PoH Mode Switcher One(1) 2-position slider switch
Firmware Update One(1) USB receptacle
DC 12V Power One(1) Locking Barrel(5.5mm outside diameter, 2.1mm inside diameter)
Video Performance
DVI/VGA Scaling Resolutions 1920×1200@60Hz, 1920×1080@60Hz, 1600×1200, 1360×768@60Hz, 1280×800@60Hz, 1280×720@60Hz, 1024×768@60Hz.
Maximum Pixel Clock 340MHz
Bandwidth HDMI:10.2Gbps(3.4Gbps per color)
YPbPr: 170MHz
VGA: 375MHz
HDMI Compliance HDMI1.4, HDCP2.2
Impedance 75Ω
Gain 0 db
Input DDC Signal 5.0 volts p-p (TTL)
Input Video Signal 0.5 to 1.0 volts p-p
Audio Performance
HDMI Embedded Audio PCM, Dolby Digital, DTS, DTS-HD
External Audio Signal 1 stereo audio input for DVI/VGA
Audio output signal 1 Dual-mono analog stereo audio
Stereo Channel Separation >80dB @ 1kHz
Frequency Response 20Hz~20K Hz
Common Mode Rejection Ratio (CMRR) >90 dB at 20 Hz ~ 20 kHz
Transmission Distance 4K/UHD@60Hz≤100m(Cat6)
Enclosure Painted aluminum
Dimensions (W x H x D) 280mm x 30mm x 100mm
Weight 514g
Operating Temperature 0° ~ +50° C
Relative Humidity 10% ~ 90%
Maximum Power Consumption 14W
Power Supply DC 12V 2A
ESD Protection 15KV
Regulatory CE, FCC

  • 1 x Multi-Format Scaler Switcher
  • 2 x Mounting ears
  • 4 x Screws
  • 4 x Plastic cushions
  • 1 x IR receiver (with carrier wave)
  • 1 x IR remote (Cell battery is not included)
  • 2 x 3-pin phoenix connector
  • 1 x RS232 Cable
  • 1 x Power adapter (DC12V 2A)
  • 1 x User Manual
Video Resolution


You may also like