Cost Effective 18G HDMI 2×4 Splitter Kit over CAT5e/6/7
NPG-DA24T KIT
Share this product:
-
Description
-
Additional information
Cost Effective 18G HDMI 2x4 Splitter Kit over CAT5e/6/7
Cost Effective 18G HDMI 2x4 Splitter Kit over CAT5e/6/7, 4K 60HZ 4:4:4, 4K 70 meter, 1080P 80 meter
2×4 HDMI Splitter Kit over CATx cable! This device distributes either one of two HDMI inputs to one HDMI and four CATx outputs. The splitter is designed with an IR loop out which is intended to cascade to additional units. It supports video resolutions up to 4K@60Hz 4:4:4 8bit and all HDMI audio formats. It can extend 1080p up to 262 feet (80 meters) and 4K signals to distance up to 229 feet (70 meters) over a single CATx Ethernet cable. It supports 12V PoC feature, which allows the receivers to be powered from the splitter over the Ethernet cables. It supports automatic video resolution down-scaling, bidirectional IR pass-through, IR cascade and RS232 control.
-
- Supports HDMI V2.0, video resolutions up to 4K@60Hz 4:4:4.
- Distributes one of two UHD/4K HDMI inputs to four CATx outputs and one HDMI loop output.
- Supports cascade connection, distributes video signal to multiple video displays.
- Maximum transmission distance is up to 70m for 4K and 80m for 1080p
- Comprehensive EDID management, lowest/highest/default resolution can be chosen on the front panel for various applications.
- Supports video resolution down-scaling, the 4K input can be automatically degraded to 1080p output on receiver for compatibility with legacy 1080p display device.
- Video auto-switching based on 5V or TMDS detection.
- SPDIF and L/R audio outputs for audio de-embedding.
- Bi-directional IR pass-through and IR cascade control.
- Controllable via front panel button, IR and RS232.
- Supports 12V PoC, the receiver can be powered by the splitter.
| Video Input | |
| Input | (1) HDMI |
| Input Connector | (1) Female type A HDMI |
| HDMI Input Resolution | Up to 4K@60Hz 4:4:4 8bit |
| Video Output | |
| Output | (1) HDMI, (4) CAT |
| Output Connector | (1) Female type A HDMI; (4) RJ45 |
| HDMI Output Resolution | Up to 4K@60Hz 4:4:4 |
| CAT Output Resolution | Up to 4K@60Hz 4:4:4 (Signal has been compressed.) |
| SPDIF Audio Output | |
| Audio Output | (1) SPDIF |
| Audio Output Connector | (1) Toslink |
| Audio Format | LPCM 2ch, Dolby Digital 2ch, 5.1ch, 7.1ch, Dolby TureHD 7.1ch, DTS 2ch, 5.1ch |
| Output Level | ±0.05dBFS |
| Frequency Response | 20Hz ~20kHz, ±1dB |
| THD+N | < 0.05%, 20Hz ~20kHz bandwidth, 1kHz sine at 0dBFS level (or max level) |
| SNR | > 90dB, 20Hz ~20kHz bandwidth |
| Crosstalk Isolation | > 70dB, 10kHz sine at 0dBFS level (or max level before clipping) |
| Noise | -90dB |
| Stereo Balanced L/R Audio Output | |
| Audio Output | (1) Stereo balanced L/R audio |
| Audio Output Connector | (1) 5-pin terminal block |
| Audio Format | PCM |
| Frequency Response | 20Hz ~20kHz, ±1dB |
| Max output level | 2.0Vrms ± 0.5dB. |
| THD+N | < 0.05%, 20Hz ~20kHz bandwidth, 1kHz sine at 0dBFS level (or max level) |
| SNR | > 80dB, 20Hz ~20kHz bandwidth |
| Crosstalk Isolation | > 70 dB, 10kHz sine at 0dBFS level (or max level before clipping) |
| L-R Level Deviation | < 0.3 dB, 1kHz sine at 0dBFS level (or max level before clipping) |
| Output Load Capability | 1kohm and higher (supports 10x paralleled 10kohm loads) |
| Noise | – 80dB |
| Control | |
| Control port | (1) EDID, (1) FIRMWARE, (1) IR ALL IN, (4) IR IN, (1) IR LOOP OUT, (1) IR OUT, (1) RS232 IN |
| Control Connector | (1) 3-pin DIP switch, (1) USB-A, (7) 3.5mm mini jacks, (1) 3-pin terminal block |
| General | |
| HDMI Standard | 2.0 |
| HDCP Version | 2.2 |
| PoC | 12V PoC power for the receiver |
| Transmission Distance | 4K≤ 70 meters (230ft), 4K/1080p ≤ 70 meters (230ft) |
| Operation Temperature | -10 ~ +55℃ |
| Storage Temperature | -25~ +70℃ |
| Relative Humidity | 10% ~ 90% |
| AC Adapter Input Power | 100V~240V AC, 50/60Hz |
| Input Power | 12V DC 2A |
| Power Consumption | 14.5W (Max) |
| Dimension (W*H*D) | 200mm x 44mm x 130mm |
| Net Weight | 855g |
Note: SPDIF audio output does not support DTS-HD Master Audio and Dolby TrueHD format.
| Video | |
| Input | (1) CAT |
| Input Connector | (1) RJ45 |
| Input Resolution | Up to 4K@60Hz 4:2:0 |
| Output | (1) HDMI |
| Output Connector | (1) Type-A female HDMI |
| Output Resolution | Up to 4K@60Hz 4:4:4 8bit HDR10 |
| Control | |
| Control Part | (1) IR In, (1) IR Out |
| Control Connector | (2) 3.5mm jacks |
| General | |
| Bandwidth | 18Gbps |
| HDMI Standard | 2.0 |
| HDCP Version | 2.2, 1.4 compliant |
| Bidirectional PoC | Support |
| HDMI 2.0 Cable Length | 4K@60Hz 4:4:4 ≤ 5m, 4K@60Hz 4:2:0 ≤ 10m, 1080p ≤ 15m |
| Transmission Distance | 4K ≤ 70 meters (230ft), 1080p ≤262 feet (80 meters) |
| Operation Temperature | -5~ +55℃ |
| Storage Temperature | -25 ~ +70℃ |
| Relative Humidity | 10%-90% |
| Power Supply | Input:100V~240V AC; Output:12V DC 1A |
| Power Consumption | 4W (Max) |
| Dimension (W*H*D) | 80mm x 16.8mm x 80mm |
| Net Weight | 70g |
Note: Please adopt quality CAT Ethernet cable compliant with CAT6e or higher standard for reliable transmission.
| Splitter | 1x NPG-DA24T 2×4 HDMI Splitter over CATx |
| 4x Plastic Cushions | |
| 1x RS232 Cable (3-pin to DB9) | |
| 1x IR Cable (3.5mm to 3.5mm, used for IR cascade) | |
| 4x IR Receivers | |
| 1x IR Emitter | |
| 1x Power Adaptor (12V DC 2A) | |
| Receivers | 4x NPG-EX60R-H2 Receivers |
| 4x Velcro Strips | |
| 1x User Manual |
| Video Resolution | 1080P, 4K |
|---|
