HDMI 2.0 1×4 Splitter with Audio Breakout and Down-scaling
SUH4AU-H2
-
Description
-
Additional information
HDMI 2.0 1x4 Splitter with Audio Breakout and 4K to 1080p Down-scaling
HDMI 2.0 1x4 Splitter with Audio Breakout and 4K to 1080p Down-scaling 4K 60Hz 4:4:4, Down Scaling, EDID
SUH4AU-H2 is one input to four output HDMI2.0 Splitter. The splitter supports HDMI video resolution up to 4K@60Hz 4:4:4, 1080p 3D and multichannel audio formats. Besides passing EDID information from the display, there are multiple built-in EDID settings can be selected by the 4-pin DIP switch on the front panel. The splitter can de-embed digital stereo audio to one analog RCA audio output and one optical Toslink audio output to provide audio sources for existing audio systems.
The splitter supports 4K to1080p down-scaling up to 4 outputs. Moreover, the splitter provides a Micro-USB port for convenient firmware upgrade.
- Splits a single HDMI input to four HDMI outputs.
- Supports HDMI 2.0, 4Kx2K@60Hz 4:4:4, Dolby Vision.
- 18Gbps high bandwidth.
- HDMI input supports HDCP 2.2 and the outputs support HDCP Active or HDCP Passive mode.
- Supports video resolution down-scaling, the 4K input can be automatically degraded to 1080p output for compatibility with 1080p display.
- Built-in signal equalizer, provides capability to use longer range HDMI cable.
- Up to 6 types of built-in EDIDs can be selected by DIP Switch.
- RCA and Toslink audio outputs for audio de-embedded.
- Up to 6 units can be cascaded to distribute video signal to multiple video displays.
- CEC pass-through.
- Micro-USB port for convenient firmware upgrade.
| Video Input | |
| Input | (1) HDMI |
| Input Connector | (1) Female type-A HDMI |
| HDMI Input Resolution | Up to 4Kx2K@60Hz 4:4:4 |
| HDMI Standard | 2.0 |
| HDCP Version | 2.2, 1.4 compliant |
| Video Output | |
| Output | (4) HDMI |
| Output Connector | (4) Female type-A HDMI |
| HDMI Output Resolution | Up to 4Kx2K@60Hz 4:4:4 |
| HDMI Standard | 2.0 |
| HDCP Version | 2.2, 1.4 compliant |
| Audio | |
| Output | (1) AUDIO OUT, (1) SPDIF OUT |
| Output Connector | (1) RCA connector (L+R), (1) Toslink connector |
| HDMI Audio Format | LPCM 7.1 audio, Dolby Atmos®, Dolby® TrueHD, Dolby Digital® Plus, DTS: X™, and DTS-HD® Master Audio™ pass-through |
| DP Audio Format | 8 channels LPCM, up to 24bit 192Khz, AC3, DTS |
| Analog L/R audio Format | PCM |
| Toslink Audio Format | PCM, Dolby Digital, DTS, DTS-HD |
| Max Output Level | 2.0Vrms ± 0.5dB. 2V = 16dB headroom above -10dBV (316mV) nominal consumer line level signal |
| THD+N | <0.05% (-80dB), 20Hz ~ 20KHz bandwidth, 1KHz sine at 0dBFS level (or max level) |
| SNR | >80dB, 20Hz ~ 20KHz bandwidth |
| Crosstalk Isolation | >70dB, 10KHz sine at 0dBFS level (or max level before clipping) |
| L-R Level Deviation | <0.3dB, 1KHz sine at 0dBFS level (or max level before clipping) |
| Frequency Response Deviation | <±0.5dB 20Hz ~ 20KHz |
| Output Load Capability | 1KΩ and higher (supports 10x paralleled 10KΩ loads) |
| Stereo Channel Separation | >70dB@1KHz |
| Control | |
| Control Part | (1) EDID 4-pin DIP switch, (1) Micro-USB port |
| General | |
| Bandwidth | 18Gbps |
| Operation Temperature | -10 ~ +55℃ |
| Storage Temperature | -25 ~ +70℃ |
| Relative Humility | 10% – 90% |
| Power Supply | Input:100V~240V AC; Output: 5V DC 1A |
| Power Consumption | 4W(Max) |
| Dimension (W*H*D) | 190mm x 20mm x 100mm |
| Net Weight | 545g |
- 1x SUH4AU-H2 HDMI 2.0 1×4 Splitter
- 2x Mounting Ears with 4 Screws
- 4x Plastic Cushions
- 1x Power Adapter (5V DC 1A)
- 1x User Manual
| Video Resolution | 1080P, 4K |
|---|
