4K HDBaseT 2.0™ Extender w/ HDMI® & USB 2.0 KVM support
HDMI 2.0 4K HDBaseT 2.0™ Extender w/ HDMI® & 3 x USB 2.0 KVM & RS232 support 4K 70 Meter, 1080P 100 meter up to
Compliant with HDMI 2.0 & HDCP 2.2,The HDBaseT 2.0 KVM Extender Set is a 4K HDMI Extender set developed with the latest HDBaseT™ 2.0 technology to extend uncompressed HDMI video, audio, USB 2.0, control signals and PoC over a single CAT5e/6 cable. The unidirectional PoC compliant extender comes with only one power supply, which means that the Receiver can be powered via Transmitter to save installers time and added cost to installing a power outlet. Ideally designed for smart displays and KVM solutions fitting digital signage markets.
- Compatible with HDMI1.4 and is backwards compatible with all previous HDMI standards(e.g. HDMI 1.4), delivers high-resolution AV signal(1080p 3D, 4Kx2K@60Hz)
- Support HDBT2.0, transmit 1080P/4Kx2K signal up to 100m over single CAT6 cable
- EDID Pass-through
- 2 compliant
- Front panel status LEDs for power, link & HDCP
- USB & RS232 control
- Unidirectional PoC (Power over HDBaseT)
| Transmitter | |
| Input | (1) HDMI (19 pin Type-A male) |
| Output | (1) HDBT (RJ45 female); (1) USB OUT (Type-B) |
| Other | (1) RS232 (3-pin pluggable terminal block) |
| Receiver | |
| Input | (1) HDBT (RJ45 female); (1) USB IN (Type-A) |
| Output | (1) HDMI (19 pin Type-A male) |
| Other | (1) RS232 (3-pin pluggable terminal block) |
| General | |
| HDMI Embedded audio | PCM/Dolby Digital/DTS/DTS-HD |
| Signal Standard | HDMI1.4& HDCP2.2 |
| Transmission Mode | HDBaseT2.0 |
| Transmission Distance | 1080P/4Kx2K≤100m(Cat6) |
| Resolution | Up to 4K×2K@60Hz 4:2:0 |
| Bandwidth | 10.2Gbps |
| EDID Management | EDID Pass-Thru |
| Operation Temperature | 0 ~ +40℃ |
| Storage Temperature | -10 ~ +55℃ |
| Relative Humidity | 10% ~ 90% |
| External Power Supply | Input:100V~240V AC; Output: DC 12V 2A |
| Power Consumption | 18W(max) |
| Dimension (W*H*D) | 4.5”x 0.86” x 3.74”/116 x 22 x 95(mm) |
| Net weight | TX:197g; RX:198g |
| 1 x Transmitter | 1 x Receiver |
| 4 x Detachable Mounting Ears | 8 x Screws |
| 1 x Power Adapter (DC 12V 2A) | 8 x Plastic Cushions |
| 2 x RS232 cables (Phoenix to 9 Pin D-Sub) | 1 x User manual |
