Back to top
  • +905437600862 (9AM 6PM)
  • Professional Video and Audio Solutions
In stock

2×1 Scaler Switcher with HDBaseT Output Transmitter

TPHD463

Share this product:

2x1 Scaler Switcher with HDBaseT Output Transmitter

2x1 Scaler Switcher with HDBaseT Output, 1x HDMI, 1x VGA Video Signal Input and 1x HDBaseT Output Transmitter, support PoH

The product is an under table mounted switcher designed to be the primary PC interface for classrooms, boardrooms, and conference centers. It features VGA + Audio to HDMI conversion with VGA scaling up to 1920×1200 and an HDMI input.

The HDBaseT Lite Transmitter utilizes HDBaseT technology to extend the digital output up to 70 meters away using solid core shielded Category 5e or greater cable. This transmitter device is compatible with several HDBaseT receivers, but is designed to work primarily with the HDBaseT Receiver. The unit features multiple EDID modes to eliminate user confusion, and incompatible video formats. An HDMI output is available for use to connect to a local display.

The HDBaseT Lite Transmitter can be powered from the rear panel or by Power over HDBaseT (PoH), including midspan injectors that support Power over Ethernet (PoE) Alternative A. The HDBaseT Lite Transmitter may also power compatible HDBaseT receivers. Built-in surge protection and diagnostic LEDs ensure hassle-free and robust installations. The HDBaseT Lite Transmitter also features a customizable power management system, which will put the unit into a low power state after no video for 30 minutes or being inactive for 3 hours by default.

The HDBaseT Lite Transmitter will detect which input has an active video input, and switch to that input – if both inputs are active, the “last in” will be selected. RS232 control of the HDBaseT Lite Transmitter can be accomplished by connecting to the RS232 port on a compatible receiver, such as a HDBaseT Receiver, or through a direct connection on the RS232 input of the device.

The HDBaseT Lite Transmitter can be programmed to control the connected display. This allows display power and input to be automatically controlled based on video activity, eliminating the need for a third party control system in many installations.

TPHD463 HDBaseT Lite Transmitter
RS232 cable (3-pin to DE9)
USB Programming Cable
12V DC Power Supply
3-pin Removable Screw Terminal
User Manual

Note: HDBaseT Receiver sells separately. Please ask to dealers

Input / Output Connections
HDMI Input One (1) HDMI Type A Receptacle
VGA Input One (1) PC Video HD-15-F Receptacle
Analog Audio One (1) 3.5 mm TRS Receptacle
HDBaseT Port One (1) 8P8C port (Shielded RJ45)
Power One (1) 5.5 mm OD, 2.6 mm ID Threaded Barrel
RS232 Port One (1) 3-pin Removable Terminal Block Connector
Firmware Port One (1) USB Type B Micro Receptacle
Supported Audio, Video and Control
Video Resolutions SMPTE: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p, UHD/30
VESA: Resolutions up to 1920×1200
Color Depth: 24, 30, 36, 48bit
VGA Scaling Resolutions (60 Hz) 1024×768, 1400×1050, 1600×1200, 1280×800, 1360×768, 1920×1200, 720p, 1080p
Maximum Video Compatibility at 70 m Deep Color 36/30/24 Bit at 1080p
Maximum Video Compatibility at 40 m Deep Color 48 Bit at 1080p, 3D (HDMI Input), UHD/30.
Video Compliance HDMI 1.4 and HDCP 1.4
Embedded Audio Up to PCM 8 channel, Dolby Digital TrueHD, and DTS-HD Master Audio
Analog Audio Analog stereo line-level (Converted to 2ch 24bit PCM 48kHz)
ARC (Audio Return Channel) No
HEC (HDMI Ethernet Channel) No
CEC (Consumer Electronics Control) Yes (HDMI Pass-through Only)
Baud Rate (Wall plate control) 2400, 4800, 9600 (default), 19200, 38400, 57600, 115200
Supported Baud Rates (Display Control) 2400, 4800, 9600, 19200, 38400, 57600, 115200
HDBaseT Signal Characteristics
Maximum Distance 70 m (229 ft)
Cable Requirements Continuous solid core Category 5e or greater with TIA/EIA-568B crimp pattern (no couplers in-line)
Bandwidth 10.2 Gbps
HDBaseT Chipset VS010TX
Chassis and Environmental
Construction Black Alumininum
Dimensions (H x W x D) 30 mm x 172 mm x 84 mm (1.18 in x 6.77 in x 3.31 in)
Shipping Weight 0.68 kg (11.5 lbs.)
Operating Temperature 0° to +40° C (+32° to +104° F)
Operating Humidity 20% to 90%, Non-condensing
Storage Temperature -10° to +60° C (+14° to +140° F)
Storage Humidity 20% to 90%, Non-condensing
Power and Regulatory
Power Supply 12V DC 2A or PoH (Power over HDBaseT)
Power over Ethernet (PoE) Compatibility 802.3af Alternative A
Power Consumption 10 watts
Default Automatic Standby Mode 30 minutes no signal
ESD Protection 16kV
Regulatory CE, RoHS
Other
Diagnostic Indicators HDCP, Link, VGA, and HDMI
Reset Switch Microswitch
Video Resolution

1080P

You may also like