4K HDMI Extender with Audio Breakout and Relay Control via HDBaseT Technology
TPUH416
-
Description
-
Additional information
4K HDMI Extender with Audio Breakout and Relay Control via HDBaseT Technology
4K HDMI Extender w/ HDMI® & RS-232 Relay Control Extension and Audio De-Embedding 4K 40 Meter, 1080P 70 meter up to
Thanks for choosing the 4K HDMI Extender which consists a transmitter and a receiver. The extender is designed to extend 4K@60Hz 4:2:0 HDMI video to distance up to 40 meters (131 feet) and 1080P@60Hz video to distances up to 70 meters (230 feet) over a single CATx cable. Bi-directional Power over Cable (PoC) feature allows the transmitter or receiver to be powered by each other without the need for a nearby AC power outlet. It supports stereo and multichannel audio on the HDMI ports. In addition to the audio embedded in the HDMI input stream, the audio is simultaneously de-embedded to an analog audio output and an S/PDIF audio output.
The extender supports RS232 pass-through to control source or display devices remotely. It also supports CEC pass-through. Moreover, it provides two RELAY ports for controlling relay device such as the rise and fall of the projector screen.
- Supports HDMI 1.4 and the HDMI video resolution up to 4K@60Hz 4:2:0.
- Supports HDCP and up to HDCP 2.2 version.
- Extends 4K@60Hz 4:2:0 signal up to 40m and 1080P@60Hz signal up to 70m via a single CATx cable.
- Supports CEC pass-through.
- Supports bi-directional PoC.
- Supports bi-directional RS232 pass-through.
- Supports RS232 relay control.
- Supports audio de-embedding.
TPUH416T | |
Video Input | (1) HDMI |
Video Input Connector | (1) Type-A female HDMI |
Video Output | (1) HDBT |
Video Output Connector | (1) RJ45 |
Audio Output | (1) L+R OUT, (1) SPDIF OUT, |
Audio Output Connector | (1) 3-pin terminal block, (1) Toslink connector |
Control | (1) RS232 |
Control Connector | (1) 3-pin terminal block |
TPUH416R | |
Video Input | (1) HDBT |
Video Input Connector | (1) RJ45 |
Video Output | (1) HDMI |
Video Output Connector | (1) Type-A female HDMI |
Control | (1) RS232, (2) RELAY (1&2) |
Control Connector | (3) 3-pin terminal block |
General | |
Video Resolution | Up to 4K@60Hz 4:2:0 |
HDMI Audio Format | LPCM 7.1 audio, Dolby Atmos®, Dolby® TrueHD, Dolby Digital® Plus, DTS:X™, and DTS-HD® Master Audio™ pass-through. |
Analog (L+R) Audio Format | PCM |
SPDIF Audio Format | PCM, Dolby Digital, DTS, DTS-HD |
Frequency Response | 20Hz–20KHz, ±3dB |
THD+N | <0.05%, 20Hz – 20KHz bandwidth, 1KHz sine at 0dBFS level (or max level) |
SNR | >90dB, 20Hz-20KHz bandwidth |
Crosstalk Isolation | <-70dB, 10KHz sine at 0dBFS level (or max level before clipping) |
Noise Level | -90dB |
Max Output Level | 2.0Vrms ± 0.5dB. 2V = 16dB headroom above -10dBV (316mV) nominal consumer line level signal |
L-R Level Deviation | <0.05dB, 1KHz sine at 0dBFS level (or max level before clipping) |
Output Load Capability | 1KΩ and higher (Supports 10x paralleled 10KΩ loads) |
Bandwidth | 10.2Gbps |
HDMI Standard | 1.Nis |
HDCP Version | Output supports HDCP1.4, Input supports up to HDCP2.2. |
CEC | Pass-through |
EDID | Pass-through |
Bidirectional PoC | Supported |
Transmission Standard | HDBaseT |
Transmission Distance | 4K@60Hz 4:2:0 ≤ 40 meters (131 feet), |
1080P@60Hz ≤70 meters (230 feet) | |
Operation Temperature | -5~ +55℃ |
Storage Temperature | -25 ~ +70℃ |
Relative Humidity | 10%-90% |
Power Supply | Input:100V~240V AC; Output:24V DC 1.25A |
Power Consumption | 9W (Max) |
Dimension (W*H*D) | Tx/Rx: 130mm x 19.5mm x 84.4mm |
Net weight | Tx: 260g, Rx:270g |
l 1x Transmitter | l 1x Receiver |
l 2x Tx Mounting Ears with 4 Screws | l 2x Rx Mounting Ears with 4 Screws |
l 4x Tx Plastic Cushions | l 4x Rx Plastic Cushions |
l 1x Tx 3-pin Terminal Block | l 3x Rx 3-pin Terminal Blocks |
l 1x RS232 Cable (3-pin to DB9) | l 1x Power Adapter (24V DC 1.25A) |
l 1x User Manual |
Note: Please contact your distributor immediately if any damage or defect in the components is found.
Video Resolution | 1080P, 4K |
---|---|
Cable Type | Copper |