Wallplate Control Keypad 6 button and Volume Knob for Only SC51TS
WP6K
-
Description
Wallplate Control Keypad 6 button and Volume Knob for Only SC51TS
Wallplate Control Keypad 6 button and Volume Knob for Only SC51TS , Program buttons to send RS232 commands to control projectors, screens and other third-party devices.
WP6K is a Wallplate Control Keypad, used as a remote control to send IP command to control devices, with a software to define the knob and keys’ function. The software features most of the frequently used functions which makes the usage of the device fastest and easiest.
WP6K only requires CATx cables to connect switch and controlled devices as a point-to-point or multipoint-to-multipoint control system, from a PoE-equipped network switch, to deliver both control signal and power, and provide fast, hassle-free installation.
WP6K provides a hassle-free means of controlling the AV system in a meeting room or classroom, and will always have a consistent control interface from room to room.
Note: The WP6K Wallplate Control Keypad only works with our SC51TS Compact Scaler Switcher.
- Remote control panel for IP-based scaler and switcher products.
- Six customizable buttons, can be defined function and trigger mode by TCP/IP and RS232, with changeable labels, Allow system designers and installers to easily place printed labels on the controller under a protective cover.
- It can be powered by Ethernet (PoE).
- Elegant US one gang design with White Flat Paint coating.
- Crystal and backlit buttons with easy user-friendly customizable changeable labels.
- Dimension: 70mm long and 34mm wide.
| Control Port | (1) TCP/IP; (1) RS232 |
| Control Connector | (1) RJ45; (1) 3-Pin Pluggable terminal block; |
| Baud Rate And Protocol | 57600 baud, 8 data bits, 1 stop bit, no parity |
| Power Consumption | 1W (Max) |
| Temperature | -20 ~ +70°C |
| Humidity | 10% ~ 90% |
| Power Supply | Input: 100VAC~240VAC, 50/60 Hz; |
| Output: 12VDC 1A | |
| Net Weight | 150g |
| Dimensions（W*H*D） | 86mm x 86mm x 41mm |
| 1 x WP6K |
| 6 x Button Caps |
| 1 x 3-pin Phoenix Connector |
| 1 x User Manual |
| 2 x Mounting Screw |
| 1 x Button Label (Film) |
| 1 x Power Adapter (12VDC 1A) |
