Back to top
  • +905437600862 (9AM 6PM)
  • Professional Video and Audio Solutions
Out of stock

Wallplate HDBaseT Transmitter 1x HDMI 1x Display Port Input with RS-232 Control – Discounted


SKU: TPHD462 Category:
Share this product:

Scaler Wallplate HDBaseT Transmitter 1 x HDMI 1x Display Port Input with RS-232 Control

1080P Wallplate HDBaseT Transmitter 1 x HDMI Input 1x Display Port, Auto-Switch option 1080P resolution up to 70 meter

The product is a one-gang, Decora-style wallplate designed to be the primary PC interface for classrooms, boardrooms, and conference centers. It features DisplayPort + Audio to HDMI conversion and an HDMI input. If the DisplayPort signal does not support embedded audio, the analog audio input port can be accessed via RS232.

The HDBaseT Transmitter utilizes HDBaseT technology to extend the digital output up to 70 meters away using solid core shielded Category 5e or greater cable. This transmitter device is compatible with several HDBaseT receivers, but is designed to work primarily with the HDBaseT Receiver. The unit features multiple EDID modes to eliminate user confusion, and incompatible video formats.

The HDBaseT Transmitter can be powered from the rear panel or by Power over HDBaseT (PoH), including midspan injectors that support Power over Ethernet (PoE) Alternative A or Alternative B. Built-in surge protection and diagnostic LEDs ensure hassle-free and robust installations. The HDBaseT Transmitter also features a customizable power management system, which will put the unit into a low power state after no video for 30 minutes or being inactive for 3 hours by default. When using the local power input, 12V DC is available for other devices on the power output connections on the rear of the device.

The HDBaseT Transmitter will detect which input has an active video input, and switch to that input – if both inputs are active, the “last in” will be selected. RS232 control of the HDBaseT Transmitter can be accomplished by connecting to the RS232 port on a compatible receiver, such as a HDBaseT Receiver, or through a direct connection on the RS232 input of the device

The HDBaseT Transmitter can be programmed to control the connected display. This allows display power and input to be automatically controlled based on video activity, eliminating the need for a third party control system in many installations.

Input / Output Connections
HDMI Input One (1) HDMI Type A Receptacle
DisplayPort Input One (1) DisplayPort Receptacle
Analog Audio One (1) 3.5 mm TRS Receptacle
HDBaseT Port One (1) 8P8C port (Shielded RJ45)
Power One (1) 2-pin Removable Terminal Block Connector
RS232 Port with 12V DC Output One (1) 4-pin Removable Terminal Block Connector
Firmware Port One (1) USB Type B Micro Receptacle
Supported Audio, Video and Control
Video Resolutions SMPTE: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p, UHD/30
VESA: Resolutions up to 1920×1200
Color Depth: 24, 30, 36, 48bit
Maximum Video Compatibility at 70 m Deep Color 36/30/24 Bit at 1080p
Maximum Video Compatibility at 40 m Deep Color 48 Bit at 1080p, 3D (HDMI Input), UHD/30.
Video Compliance HDMI 1.4 and HDCP 1.4
Embedded Audio Up to PCM 8 channel, Dolby Digital TrueHD, and DTS-HD Master Audio
Analog Audio Analog stereo line-level (Converted to 2ch 24bit PCM 48kHz)
ARC (Audio Return Channel) No
HEC (HDMI Ethernet Channel) No
CEC (Consumer Electronics Control) Yes (HDMI Pass-through Only)
Baud Rate (Wall plate control) 2400, 4800, 9600 (default), 19200, 38400, 57600, 115200
Supported Baud Rates (Display Control) 2400, 4800, 9600, 19200, 38400, 57600, 115200
HDBaseT Signal Characteristics
Maximum Distance 70 m (229 ft)
Cable Requirements Continuous solid core Category 5e or greater with TIA/EIA-568B crimp pattern (no couplers in-line)
Bandwidth 10.2 Gbps
HDBaseT Chipset VS010TX
Chassis and Environmental
Construction Alumininum Housing
Dimensions (H x W x D) 104 mm x 89 mm x 51 mm (4.09 in x 3.50 in x 2.01 in)
Shipping Weight 0.68 kg (11.5 lbs.)
Operating Temperature 0° to +40° C (+32° to +104° F)
Operating Humidity 20% to 90%, Non-condensing
Storage Temperature -10° to +60° C (+14° to +140° F)
Storage Humidity 20% to 90%, Non-condensing
Power and Regulatory
Power Supply 12V DC 2A or 48V DC PoH (Power over HDBaseT)
Power Output Port 12V DC, 500 mA
Power over Ethernet (PoE) Compatibility 802.3af Alternative A and Alternative B
Power Consumption 10 watts
Default Automatic Standby Mode 30 minutes no signal
ESD Protection 16kV
Regulatory CE, RoHS
Warranty 2 years
Diagnostic Indicators HDCP, Link, HDMI, and DisplayPort
Reset Switch Microswitch
  HDBaseT Transmitter   12V DC Power Supply
  2-pin Removable Screw Terminal   4-pin Removable Screw Terminal
  RS232 cable (3-pin to DE9)   User Manual
Video Resolution


Cable Type


You may also like