Ultra-thin 4K HDMI Extender up to 4K or 1080P 120m PoC supports
NPG-EX80
Share this product:
-
Description
-
Additional information
Ultra-thin 4K HDMI Extender up to 4K or 1080P 120m PoC supports
Ultra-thin 4K HDMI Extender up to 4K 120 meter 1080P 120m PoC supports, with IR Extend 4K resolution up to 120 meter , 1080P resolution up to 120 meter
The NPG-EX80 is a cost-effective point-to-point extender set for HDMI V1.4 and IR signals. The extender supports 4K@30Hz with 4:4:4 Chroma sampling along with HDMI data rates up to 10.2Gbps and HDCP 1.4 compliant. The NPG-EX80 provides HDMI transmission up to 393 feet (120 meters) for 4K@30Hz 4:4:4 or 1080p, over single CAT5e/6 cable. The extender supports video resolution down-scaling allowing the 4K input to be automatically downscale to 1080p output for compatibility with 1080p display.
- Supports HDMI V1.4, up to 4K@30Hz 4:4:4, HDCP 1.4.
- Extends 4K or 1080p HDMI signal up to 393 feet (120m) over a single CAT5e/6 cable.
- HDMI loop out on transmitter.
- Bi-directional IR pass-through.
- Supports video resolution down-scaling, the 4K input can be automatically degraded to 1080p output on receiver for compatibility with legacy 1080p display device.
- Features visually lossless compression with no latency.
- Smart EDID management.
- Compact design, easy to install and simple to operate.
| Transmitter | |
| Input | (1) SOURCE (19-pin type-A female HDMI) |
| Output | (1) DISPLAY (19-pin type-A female HDMI) |
| (1) CATx OUT (RJ45) | |
| Control | (1) IR IN (3.5mm mini jack) |
| (1) IR OUT (3.5mm mini jack) | |
| Receiver | |
| Input | (1) CATx IN (RJ45) |
| Output | (1) DISPLAY (19-pin type-A female HDMI) |
| Control | ((1) IR IN (3.5mm mini jack) |
| (1) IR OUT (3.5mm mini jack) | |
| General | |
| Video Resolution | Up to 4K@30Hz 4:4:4 |
| HDMI Audio Format | Supports LPCM 2ch, LPCM 5.1ch, LPCM 7.1ch, Dolby Digital 2ch, Dolby Digital 5.1ch, DTS 2ch, DTS 5.1ch, DTS 96/24 5.1ch. |
| Transmission Distance | 4K/1080p ≤ 120 meters (393ft) (CAT6a/(F/FTP)) |
| HDMI Version | Up to 1.4 |
| HDCP Version | Up to 1.4. The HDCP of output follows the HDCP version of display device. |
| EDID Management | Supported. |
| Power Supply | Input: 100 to 240V AC, 50/60Hz; Output: 12V DC 1A |
| Power Consumption | 4W (Max) |
| Operation Temperature | -5 to +55℃ (+23° to +131°F) |
| Storage Temperature | -25 to +70℃ (-13° to +158°F) |
| Relative Humidity | 10% to 90%, Non-condensing |
| Dimensions (W*H*D) | 80mm x 16.8mm x 80mm |
| Net Weight | Tx: 65g, Rx: 60g |
| Resolution | CAT5e (FTP) | CAT6a (U/FTP) |
| 1080p@60Hz | 120m | 120m |
| 4K@30Hz | 120m | 120m |
Packing List
- 1x Transmitter (Tx)
- 1x Receiver (Rx)
- 1x IR Receiver
- 1x IR Emitter
- 2x Velcro Tape
- 1x Power Adaptor (12V DC 1A)
- 1x Quick Operation Guide
| Video Resolution | 1080P, 4K |
|---|---|
| Cable Type | Copper |
